Explore the community Forums Lectora Online Lectora Online Questions & Answers Using SCORM 1.2 and SCORM 2004 with an LMS

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #309901 Score: 1
    Profile photo of Joe Wieloch
    Joe Wieloch
    friend finder
    LUC16 Attendee
    verified member
    wise owl
    17 pts

    This has been covered many times so it might repeat some other posts, but this does also specify how to implement displaying progress in an LMS when publishing to SCORM 2004 (this works for for 360 training’s LMS, and potentially many others).

    For SCORM 1.2 use the AICC_Lesson_Status variable which sets the cmi.core.lesson_status for the SCO (sharable content object, or in our case a title). Different LMSs may want special values for this, but typical ones are ‘not attempted’, ‘incomplete’, and ‘completed’. The variations are usually only for the ‘completed’ value: ‘Completed’, ‘complete’, ‘passed’ are some variations.

    For SCORM 2004 we support the 3rd Edition Spec. We do not use cmi.progress_measure instead we follow the specification which allows us to set the cmi.completion_status directly. This is done by using the CMI_Completion_Status variable.

    This page is helpful for mapping Lectora variables to the SCORM spec:

    The 2004 specification says that the LMS shall implement the cmi.completion_status data model element as a state consisting of the following vocabulary tokens:
    • completed
    • incomplete
    • not attempted
    • unknown

    Also of note for SCORM 2004 is the Lectora AICC_Lesson_Status variable which maps to cmi.success_status.

    The 2004 specification says the LMS shall implement the cmi.success_status data model element as a state consisting of the following vocabulary tokens:
    • passed
    • failed
    • unknown

    * If you publish to SCORM 2004 and have an LMS that shows course progress (via a progress bar) you can take advantage of that by doing a Run JavaScript action as the students progress, to set progress, try this:

    LMSSetValue(‘cmi.progress_measure’, VAR(ProgressVariable))

    Where ProgressVariable is a Lectora User variable that is set with the progress, say a value from 1 to 100 ? Or you could just set the value directly by not using a variable and putting the progress value right into the call.  For example when they are half way through:

    LMSSetValue(‘cmi.progress_measure’, 50)


    You will have to set the cmi.completion_threshold which is the point at which it’s deemed complete. Do this at the beginning of the course with another Run JavaScript action:

    LMSSetValue(‘cmi.completion_threshold’, ‘100’)

    From the specification:

    If a cmi.completion_threshold is defined for the SCO and the cmi.progress_measure data model element’s value is set by the SCO and the value is less than the cmi.completion_threshold data model element’s value, then the LMS shall evaluate and return the value of incomplete.

    As you can see we can really support any LMSs SCORM implementation.  Even non-standard implementations are easy to adjust for.  Please post questions here if you are reading this and still have questions!

    – Joe

    This post has received 1 vote up.
    #364242 Score: 0
    Profile photo of Shareen Aguilar
    Shareen Aguilar
    friend finder
    wise owl

    Hi. I know this was posted a year ago but I was wondering if you would know whether or not a SCORM 2004 upload into SABA will render no ‘completion’ results in LMS reporting.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.