Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #442113 Score: 0
    Profile photo of Vicki
    Vicki
    Member
    beginner
    intermediate
    friend finder
    curious george
    wise owl
    contributor
    picture perfect
    5 pts
    @Vicki

    Hi all. I am running into an issue where drag and drop questions, specifically the drop zones, are not following Always on top setting for other objects.

    Attached is a screen shot illustrating this problem. The TOC is set to Always on top and the test question is not. Regardless, the drop zones appear over the TOC and block selecting items from the TOC.

    Any thoughts or is this a known bug?

    Thanks!

     

    #442116 Score: 0
    Profile photo of Joe Hauglie
    Joe Hauglie
    Member
    beginner
    intermediate
    curious george
    wise owl
    picture perfect
    contributor
    friend finder
    5 pts
    @jhauglie5350

    You might check to see where things are located within the title explorer “tree.” I’ve had a couple instances where v17 didn’t follow the “always on top” property and when I poked around that was the fix. Just a thought!

    #442121 Score: 0
    Profile photo of Brian Robertson
    Brian Robertson
    Member
    beginner
    intermediate
    LUC16 Attendee
    curious george
    wise owl
    contributor
    12 pts
    @brobertson4402

    I suspect this behavior is by design.  If the TOC has priority over a drop zone then one could never reach the drop zone as the TOC would always cover it when one attempted to hit the drop zone.

    Perhaps you could arrange your drop zone(s) so that they did not conflict with the TOC area on the page?

    #442123 Score: 0
    Profile photo of Vicki
    Vicki
    Member
    beginner
    intermediate
    friend finder
    curious george
    wise owl
    contributor
    picture perfect
    5 pts
    @Vicki

    The TOC is normally hidden. You toggle the show/hide. It isn’t always visible.

    #442125 Score: 0
    Profile photo of Vicki
    Vicki
    Member
    beginner
    intermediate
    friend finder
    curious george
    wise owl
    contributor
    picture perfect
    5 pts
    @Vicki

    I will try a couple of things at the AU level of the course. Thanks for the suggestion.

    #442149 Score: 2
    Profile photo of Tim K
    Tim K
    Member
    contributor
    beginner
    intermediate
    advanced
    friend finder
    junior moderator
    advocate
    wise owl
    curious george
    Group Member
    346 pts
    @timk

    For some reason the dropzones have higher z-indices than other objects on the page. You can either give the toc a higher z-index with custom css or check “Anchor Position” which will lift the toc over the page completely.

    This post has received 2 votes up.
    #442163 Score: 0
    Profile photo of Vicki
    Vicki
    Member
    beginner
    intermediate
    friend finder
    curious george
    wise owl
    contributor
    picture perfect
    5 pts
    @Vicki

    Thank you Tim!!! Anchoring the TOC seems to be working perfectly.

    I understood that anchoring would essentially lock the x and y positions of an object, but never considered it could affect the z.

    Much appreciated!!!!!

    #442197 Score: 1
    Profile photo of Tim K
    Tim K
    Member
    contributor
    beginner
    intermediate
    advanced
    friend finder
    junior moderator
    advocate
    wise owl
    curious george
    Group Member
    346 pts
    @timk

    It doesn’t really affect the z. Through this the toc is not added to the “page” but to a div above the pageDIV. This means, it can be used like this as long as you don’t need to use “Anchor position” as it is originally meant to be, i.e. it can be used like this if you don’t have scrolling pages in your course.

    This post has received 1 vote up.
Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.